I've started moding my case. The back panel is in the garage now. I got my Dremel out from it's place of rest and started cutting. It works quite well except that I've already gone through 4 cutting blades. I estimate at this rate I'll need another 18 blades to cut the air vent holes in the back panel. Cutting blades I will have to replace and consequently also include in my costs.
| Item | Amount | Individual Price | Postage | Total Price |
| Helmer Cabinet | 1 | £24.99 | £7.50 | £32.49 |
| Motherboard, AMD Athlon 2 64bit processor and 1gb of ddr2 ram | 5 | £30 | free | £150 |
| 300W PSU | 1 | 99p | £4.50 | £5.49 |
| 25 Brass Motherboard Standoffs | 1 | £3.19 | free | £3.19 |
| 120mm red led EVO case fan | 4 | £2.99 | £5 | £16.96 |
| 120mm chrome fan guard | 4 | £1.45 | 40p | £6.20 |
| Q-Tec PSU Power Supply Unit 500w | 1 | £6 | £6.50 | £12.50 |
| 8GB total 4 x 2 Gb Kingston DDR2 240 pin 533Mhz RAM | 2 | £11.89 | £7.60 | £31.38 |
| Hitachi Deskstar 80GB SATA Hard Drive | 4 | £10 | free | £40 |
| 0.5M SATA Serial ATA 7Pin HDD DATA Cable Lead LOT 10 | 1 | £4 | free | £4 |
| 24 Pin to 20 Pin ATX Power Converter Conversion Cable | 1 | £1.88 | free | £1.88 |
| 15CM 4 Pin IDE Molex Male to 15 SATA Female Power Cable | 1 | 99p | free | 99p |
| Total: | £305.08 |
No comments:
Post a Comment
Note: only a member of this blog may post a comment.